Data Networking

Data Networking:

		OPTI-6100 1-Port GIGE EOS Enhanced, HIG
		OPTI-6100 Optical Multiplexer Module (Fiber)
		OPTI-6100 SMX Enhanced Fan Pack (with Alarms)
		OPTI-6100 HFANN Air Filter
		OPTI-6100 Long Reach Optical Module (OC-48 Form Factor)
		OPTI-6100 Electrical GigE SFP Module (RJ45, Copper)
		MX2820 19 Inch Chassis (Provides up to seven redundant M13s in two RU of space with fourteen MUX, one SCU. Uses local powered 48 VDC.)
		MX2820 23-Inch Chassis (Provides up to nine redundant M13s in two RU of space with 18 MUX, one SCU. Uses local powered 48 VDC.)
		MX2820 Mux Card (for use in MX2820 Chassis. Supports FLASH download data available from SCU. Provides near and far end DS3 PM. Detects DS3 alarm and loopback conditions. Monitors DS3 line conditions, sends alarms to SCU. Local or network timing modes. 1:
		The MX2820 SCU (is a plug-in unit for the MX2820 chassis that acts as an interface between the user and the modules in the MX2820 system. The MX2820 SCU also allows provisioning of IP, security, and craft port settings.)
		The MX2820 SCU (24V - is a plug-in unit for the MX2820 chassis that acts as an interface between the user and the modules in the MX2820 system. The MX2820 SCU also allows provisioning of IP, security, and craft port settings.)
		MX2820 Clock Card (for MX2820 19-Inch and 23-Inch Chassis.)
		Fan Pack (23 Inch Fan Assembly) for the MX2820
		MX2820 MUX Blank Card
		MX2820 Clock Card (Blank)
		Test Access Module
		Future Bus - to - AMP Adapter Cable (3 Feet)
		Cable (6 Foot, 2mm Future BUS to AMP Patch Cable) for the MX2820
		Cable (6 Feet, 2mm Future BUS to AMP Patch Cable) for the MX2820
		Cable (15 Feet, 2mm Future BUS to AMP Adapter) for the MX2820
		Cable (25 Feet, 2mm Future BUS to Blunt Cable) for the MX2820
		Cable (25 Feet, MX2820 Future BUS/Stub Overmold Cable)
		Cable (for the MX2820)
		Cable (50 Feet, 2mm, Future BUS to Blunt Cable)
		Cable (50 Feet, 2mm, Future BUS to Blunt Cable, Overmolded)
		Cable (75 Feet, 2mm Future BUS/Stub Overmold)
		Cable (100 Feet, MX2820, Future BUS/Stub Overmold)
		Cable (150 Feet, MX2820, Future BUS/Stub Overmold)
		Cable (200 Feet, MX2820, Future BUS/Stub Overmold)
		MX3216 Controller Card (16 DSX-1 POR)
		MX3112 Controller Card (16 Links)
		Cable (5 Feet, DSX1, 65-Pin, Male-Female, Amphenol)
		Cable Assembly (for the OPTI-6100/MX2800)
		Datamate (Hand-held LCD for configuration, test of Smart 16-16e Shelf)
		ISU 2x64 (U Interface, Standalone ISDN BRI Total Access. Supports up to 128 kbps single application or 64 kbps for two applications. Includes NT1. Supports BONDING, V.120, Clear Channel, MLPPP. V.35, RS-232, RS-530, RS-366. ASYNC or SYNC.)
		TSU DSX-1 Plug-in Module
		TSU (Single port T1-FT1 DSU-CSU with metal chassis, LCD display and front panel, 4 button keypad. VT 100 configuration, status and monitoring. Single V.35 DTE interface. Supports T-Watch PRO. Supports remote configuration-monitoring across the FDL or 8K
		DSU 56-64
		V.35 Adapter (2 Feet, Male RS-530 to Female V.35 Adapter Cable. Usually requires two for ISU 2x64 and one for ISU 512 applications.) for ISU 2x64 and ISU 512
		RM 10 AC Shelf
		ISU 128 (Smart 16-16e RM, U-Interface) Rackmount ISDN Terminal Adapter
		TSU Dual FXO Module (Provides two Foreign Exhange Office - FXO voice ports. Supports message waiting indication when used with ADTRAN Dual FXS modules.)
		TSU Dual E&M-TO Module (Provides two voice ports operating in 2- or 4-wire E&M Type I-Type II-Type V or Transmit Only modes. 2713 Hz loopback capable.)
		RS-366 Y Cable (is used with the ISU 512 for videoconferencing applications. The cable connects to the RS-366 port on the ISU 512 and provides two RS-366 connectors for videoconferencing systems operating in dual port mode at 112-128 kbps.)
		TSU ESP (Single port T1-FT1 SNMP DSU-CSU, LCD display, VT 100, SNMP and Telnet configuration and status. Integrated SLIP-PPP port and V.35 DTE connection. Modular approach with ESP DBU & ESP Ethernet cards.)
		ATLAS 800 Series Quad T1-PRI Module
		Dual ESP Mounting Shelf (Dual ESP Mounting Shelf - Houses 2 Standalone DSU IV ESP, TSU ESP, IQ Series, or ISU 512 - Requires New Housing - Products) - Color: Cream
		Blank Panel (for Dual Mounting Shelf)
		Express 5210 (Multi-protocol frame access device, includes a 10BaseT ethernet full IP router port, an EIA-232-V.35 serial port for legacy protocol support. Includes compressed voice and DBU support. V.35 requires adapter cable 1200193L1 or 1200194L1.)
		T3SU-OSU 300 HSSI Module (HSSI Interface Card for T3SU 300 and OSU 300. Card provides a 50-pin female connector and will support rates up to 44.2 Mbps)
		V.35 Interface Card (High Speed V.35 Interface Card for T3SU 300 and OSU 300. Card provides a female V.35 connector and will support rates up to 10 Mbps.)
		NT1 ACE3 Standalone Triple ISDN BRI Termination Device (3 U-Interface input 3 S-T interface output for 384 kbps videoconferencing.)
		NT1 ACE4 Standalone Quad ISDN BRI Termination Device (4 U-Interface input 4 S-T interface output for 512 kbps videoconferencing. Includes 120 VAC Power Supply)
		ATLAS 800 Series Quad E1 Module
		DSU III AR DC (All rate DSU-CSU for 4-wire dedicated DDS applications. LCD display for configuration and status; V.35 and EIA-232 DTE connections, DC power 20-60 Vdc.)
		ESU and IQ Probe V.35 Adapter Cable (6 feet, Male DB-25 to Male V.35) for the IQ Probe DTE or DCE port
		Cable (25`, Provides a 64 amp on one end for direct connect to the MX2800 and wire at the other end for connection to a frame or punch down block)
		Cable (50 Feet, 64-Pin Amphenol to Wire Cable)
		MX2800 Chassis (Does not include any controller cards or power supplies)
		MX2800 2-DS3 RJ48 Panel with Cable (1U high patch panel that provides 56 RJ connections for DSX-1 deployment. Fits in a 19 Inch rack. Includes four 6-foot 64 pin to 64 pin cables to connect directly to the rear of the MX2800)
		MX2800 E1 Breakout Panel (MX2800 accessory. One rack unit high. Provides 21 BNC connections for E1 deployment. Fits in a 19-inch rack)
		MX2800 RJ48 Patch Panel (without Cable)
		Express 6503 (without Power Cord)
		ATLAS 550 Base Unit (AC, RoHS)
		Atlas 550 T1/PRI Network Interface Module (RoHS)
		ATLAS 550 Octal FXS Module (RoHS)
		ATLAS 550 Octal FXO Module (ATLAS 550 User Interface Module. Provides 8 FXO analog RJ interfaces. Can be used in any user interface module slot.)
		ATLAS 550 Dual Nx56-64 V.35 Module (RoHS)
		ATLAS 550 Dual T1/PRI Module (RoHS)
		ATLAS 550 Quad BRI Module (RoHS)
		ATLAS 550 Quad BRI Module (ATLAS 550 User Interface Module. Provides 4 ISDN U-Interfaces. Includes 4 RJ45-RJ11 cables (7 ft). Can be used in any user interface module slot.)
		ATLAS 800 Series Octal FXS Module
		Total Access 850 Chassis (Total Access 850 chassis. One PSU slot, one system controller slot RCU, two specials slots and six access module slots. Uses TA 750-850 PSU, TA 750-850 access modules and TA 750-850 AC adapter and battery back-up. Female 50 pin
		HRM-1MA Shelf (19 inch rackmount shelf. Horizontally houses 1 standalone medium size unit of the new blue/grey industrial design like the 2nd gen. TSU ACE 1202295L1, 3rd gen TSU LT 1203060L1 or Netvanta 3200 series. Color: Cool Grey.)
		HRM-2SA Shelf (19 Inch rackmount shelf. Horizontally houses 2 standalone small size units of the new blue/grey industrial design like the 3rd gen. T1 CSU ACE-1203022L1, or the 2nd gen. Netvanta 2000 series. Color: Cool Grey)
		VRM-7MA Shelf
		NetVanta 340 System (with Standard Feature Pack Software)
		NetVanta 344 Annex A (SFP)
		Faceplate Fan (for the MX2800)
		OCU 45 19" Dual Mounting Tray (Mouting tray for OCU 45. Allows 2 OCU 45 to be mounted side by side)
		OCU 45 19 Inch Vertical Mounting Bars (Includes 2 19 Inch Vertical Mounting bars for OCU 45, used to mount up to 10 OCU 45s in 4U of space in a 19 Inch rack. Used in conjunction with 1200233L1 OCU 45 Vertical Mounting Brackets.)
		IQ 310 and IQ 710 Dual Mounting Shelf (HRM-2LA)
		1000BASE-SX LC SFP Module (RoHS)
		NetVanta 1000BASE-LX SFP Module
		NetVanta 1224 (RoHS)
		NetVanta 1224ST (ROHS)
		ATLAS 550 Base Unit (DC)
		NetVanta 1524ST (ROHS)
		NetVanta 1224 PoE
		NetVanta 1224ST PoE
		NetVanta 1224STR (DC, 24-Port Layer 2 Switch)
		Used to mount a Total Access 612, 616, or 624 in a 19 Inch rack.
		Quad Ethernet Switch Module (Quad Ethernet Switch Module Provides 4 10/100BaseT Ports for a Point to Point Unchannelized T3 Application. Up to Three Quad Ethernet)
		Cables (Two 15 feet Coax Cables)
		Two Coax Cables (50FT) for DS3 Connections
		Coax Cables (Two 6 Foot Coax Cables - D3 Connections of MX2800)
		Smart 16 Blank Panel (Front blank panel for Smart 16 shelf. Used to cover blank slots in a Smart 16 shelf. 8 panels per box.)
		Smart 16 Blank Panel (Rear blank panel for Smart 16 shelf. Used to cover blank slots in a Smart 16 shelf. 8 panels per box.)
		OCU 45 Single-Mode SC (DS3-STS-1-E3 to fiber converter for use on point to point fiber. Supports DS3, STS-1 and E3 electrical interfaces. Optical interface is a 1310 nm, single-mode laser with SC type connectors. -48 Vdc)
		OCU 45 Fiber Optic Converter (Multi-Mode ST)
		NetVanta Analog 4-Port Station Voice Interface Module (ROHS)
		NetVanta 7100 T1/PRI Voice Interface Module
		NetVanta 1355 Multiservice Access Gateway (VoIP, ROHS)
		NetVanta 1355 VoIP Multiservice Access Gateway
		ATLAS 550 Quad T1/PRI Module (RoHS)
		ADP-40 Analog Door Phone
		ATLAS 550 Quad S/T BRI Module
		IP 706 6-Line VOIP Phone
		IP 712 12-Line VOIP Phone
		Atlas 800 Video EIA-530 Cable
		Rack Adapter Kit (for the ATLAS 830 AC or ATLAS 830 DC)
		IP 501 Three-Line VOIP Telephone (with POE)
		Six-Line VOIP Telephone (with 18 Dedicated Feature Keys)
		Expansion Module (for the IP 601 or IP 650 Telephone)
		ATLAS 830 Base Unit AC (8 Slot, Enterprise Integrated Access Device)
		Cable (Atlas 800 Series Dual V.35)
		IP 4000 SIP Conference Phone (for Small to Medium Rooms)
		Power Supply (Single Port POE) for the NetVanta 100 Family
		NetVanta 3430 Chassis (Access Router for Frame Relay and Point-to-Point Connectivity. Includes Modular Network Interface and 2 Integral 10/100BaseT Ethernet Ports)
		NetVanta 3448 Chassis (Access Router for Frame Relay and Point-to-Point Connectivity. Includes Modular Network Interface and 2 Integral 10/100BaseT Ethernet Ports)
		Rackmount Kit (for NetVanta 3400)
		T3 Wide Module (for the NV 5305)
		Redundant AC Power Supply Module (for the NetVanta 5305)
		NetVanta 56-64K NetWork Interface Module (Used for the NetVanta 3200-3205 Access Router and Provides DDS network interface)
		NetVanta Analog Modem Dial Backup Module (Plug on Module for the NetVanta NIM and Provides analog Modem Restoral up to 33.6 Kbps)
		NetVanta ISDN BRI Dial Backup Module (Plug On for NetVanta NIM and Provides ISDN 64 Kbps or 128 Kbps Network Restoral)
		NetVanta Serial Network Interface Module (ROHS)
		SHDSL Network Interface Module (2 Wire SHDSL Network Interface Module NIM for NetVanta 3000 Series Access Router. Provides SHDSL Network Interface for PPP, Frame Relay, or Dry Copper Only. Approved for Use in the European Union and Australia)
		Interface Module (E1/FE1 Network Interface Module, International) for the NetVanta 3000 Series
		NetVanta ADSL Network Interface Module (for NetVanta 3000 series and NetVanta 4305 Access Routers and NetVanta 1224R/STR Swithes with integrated Router)
		NetVanta Dual T1/FT1 Network Interface Module
		Cable (NetVanta V.35 Serial Interface Cable, RoHS)
		NetVanta V.35 Serial Interface Cable (for use with -1200866L1 Serial NIM. Connects to an external DSU-CSU.)
		NetVanta X.21 Serial Interface Cable (X.21-V.11 Cable for use with -1200866L1 Serial NIM. Connects to external DSU-CSU.)
		DIM Carrier Module (Module to support a Dial Backup Interface Module-DIM without the use of a NIM)
		NetVanta 1000/3000/4000 Series E1/FE1 plus G.703 NIM (E1/FE1 with G.703 Network Interface Module - Module for NW 300 SER International)
		NetVanta Router Console Cable
		NetVanta Router Console Cable
		NetVanta 4305 Chassis (Access Router for Frame Relay and Point-to-Point Connectivity. Includes 2 NIM/DIM Slots for Existing NIMs and DIMs, 1 Slot for a Wide Module - T3 and HSSI Wide Modules not Currently Supported, and 2 Integral 10/100BaseT Ethernet Po
		Total Access IAD to Battery Backup (L1) Mounting Bracket
		Rackmount Brackets (19 Inch) for the Total Access 912, 916 and 924
		Total Access IAD to Wallmount Battery Backup (L2) Mounting Bracket
		Rackmount Brackets (23 Inch) for the Total Access 912, 916 and 924
		Total Access (AD 8-Port, Breakout Box)
		NetVanta 3000 SHDSL Annex A Network Interface Module
		DSU III AR (All Rate DSU-CSU for 4-wire Dedicated DDS or Switched 56K applications with Secondary channel. LCD display for configuration and status; V.35 and EIA-232 DTE connections; V.25bis Dialing.)
		Rackmount Display for Smart 16-16e Shelves (HT 1U, 1.75 Inch)
		Optional AC Redundant Power Supply for Smart 16-16e Shelves.
		TSU 100e (Modular T1-FT1 DSU-CSU w- embedded SNMP and V.35 interface supporting Dial BackUp. Single slot accepts 1 expansion module w- plug-on to add 4 addl DTE ports. SLIP or 10BaseT mgmt. VT 100, FDL, 8K & T-Watch PRO config. Optional V.35 Y cable need
		TSU 100 (2nd Gen, Modular T1-FT1 DSU-CSU w- embedded SNMP & V.35 interface. Single slot accepts 1 expansion module w- plug-on to add 4 addl DTE ports. SLIP mgmt. VT 100, FDL, 8K & T-Watch PRO config. Replaces TSU 100 - 1200052L3)
		TSU Nx56-64 V.35 Plug-in Module (DDS2CA2AAA TSU-TDU-ESU Multiplexer Module - Serial V.35-EIA-232-etc.)
		T1 ESF CSU ACE (Rack Mount) for the Smart 16-16e
		TSU 600 (Modular T1-FT1 DSU-CSU. Accepts up to six expansion modules or modules with plug-ons for adding up to twenty-four additional DTE ports. LCD display and front panel keypad. Includes SNMP, TR-008 and VT 100 support. No 10BaseT.)
		ISU 512 U-Interface ISDN Inverse Multiplexer (Supports up to 512 kbps for single application. Includes internal NT1s. Supports BONDING. V.35, RS-530 and RS-366. LAN-WAN connectivity, T1 backup, Videoconferencing. SYNC only.)
		ISU 512 with S-T-Interface (ISDN Inverse Multiplexer with S-T interface, supports up to 512 kbps for single application. Supports BONDING. V.35, RS-530 and RS-366. LAN-WAN connectivity, SYNC only. )
		TSU 120e (T1/FT1 DSU/CSU with Embedded SNMP DSX-1 PBX and V.35)
		TSU 120 (2nd GEN, Modular T1/FT1 DSU/CSU with Embedded SNMP,DSX-1 PBX and V.35. Single Slot Accepts 1 Expansion Module with Plug-on to Add 4 Additional DTE Ports. SLIP MGMT)
		TDU 120e DC (Rackmount 1 u high version of the TSU 120e (less display) with V.35 and DSX-1 interface, includes SNMP. Accepts one expansion module or module w-plug-on for adding up to four additional ports. Operates on +--24v to +--48v. Similar features t
		TDU 120e AC (Rackmount 1 u high version of the TSU 120e less display with V.35 and DSX-1 interface, includes SNMP. Accepts one expansion module or module w-plug-on for adding up to four additional DTE ports. Similar features to TSU 120e. NEBs compliant.)
		T3SU 300 AC (T3 DSU-CSU for unchannelized T3 applications. Ability to support up to 4 DTE ports. Single integrated HSSI port, SCSI-II 50 pin female connector and three hot swappable option slots.
		Spare AC Power Supply for the MX2800 (Supports Fan Faceplate)
		MX2800 DC Power Supply
		Spare Power Supply (24V) for the MX2800
		TSU ACE (2ND Generation)
		TSU NetVanta Router Module (SFP)
		NetVanta 2050 (2nd Generation, SFP)
		NetVanta 2054 (2nd Generation, SFP OS-based Home Office/Telecommuter Gateway which includes Firewall, NAT and Routing capability. Limited to 15 concurrent users using the Firewall. 10/100BaseT Ethernet Connectivity between LAN and Broadband Modem or Exis
		TSU 600 AC Power Supply
		OCU 45 AC Adapter (US Power Cord Provided)
		Total Access 604 (with T1 Network Interface)
		Total Access 608 (with T1 Network Interface)
		Interface Module (NetVanta Analog 2-Trunk/2-Station Voice Interface Module)
		IQ 710 T1 Network Module (Provides a single T1-FT1 interface. Includes 1 RJ48-RJ48 cable - 15 feet)
		Octal T1/E1 Wide Module (RoHS)
		NetVanta 3200 Chassis
		NetVanta T1/FT1 Network Interface Module (Provides a network interface for a fractional or full T1 for the NetVanta 1000, 3000, and 4000 Series of access routers)
		NetVanta T1/FT1+DSX-1 Network Interface Module (Provides a fractional or full T1 network interface for the NetVanta 1000, 3000, and 4000 Series, as well as, a DSX-1 interface for connecting voice equipment like a PBX)
		ADSL Network Interface Module (for the NetVanta 3000 Series)
		NetVanta 3205 Chassis (RoHS)
		NetVanta 3305 (2nd GEN, ROHS)
		NetVanta 4305 Chassis (Access Router for Frame Relay and Point-to-Point Connectivity - Includes: 2 NIM/DIM Slots for Existing NIMs and DIMs, 1 Slot for a Wide Module and 2 Integral 10/100BaseT Ethernet Ports)
		NetVanta 3205 DC Chassis (Chassis Only - Access router for frame relay and point-to-point connectivity. 21 VDC and -48VDC power supply. Includes modular network interface and 10/100BaseT Ethernet port. Features include IP routing, OSPF, RIP V1 and V2, St
		NT1 ACE with Power Supply
		T1 CSU ACE 3rd Gen (T1 Channel Service Unit used for interfacing CPE equipment to a T1 line. Powered by 12 - 48VDC. AC to 12 VDC wall plug included w/ unit. Unit is transparent to ESF and B8ZS. New housing with LEDS on front of unit and interfaces on rea
		TSU LT (3rd Gen)
		ISU 512e U-Interface (ISDN Inverse Multiplexer, Includes V.35 DTE interface, RS-366 Dial interface and EIA-232 craft interface. Includes 10BaseT Ethernet port for SNMP and Telnet access.)
		NetVanta 3200 3rd Gen
		NetVanta 3205 (3rd Gen)
		NetVanta 3205 (DC, 3rd Gen)
		V.34 DBU Card
		V.34 DBU Module (Modular V.34 Dial Backup Card) works in IQ 710
		T1 ESF CSU ACE (4th Generation)
		T1 ESF CSU ACE (4th Gen DC)
		MX2800 Controller with Modem (Spare Controller Card for the MX2800, Incorporates DS3 and 28 DSX-1`s. Card also incorporates an integrated modem. Will work in either AC or DC versions of the MX2800)
		MX2800 Controller Card (without Modem - Spare Controller Card for the MX2800. Incorporates DS3 and 28 DSX-1`s. Will work in either AC or DC versions of the MX2800. Has NO built-in modem)
		Summit X250e-24t
		Summit X250e-48t
		Summit X250e-24p
		Summit X250e-48p
		Summit X250e-48p-TAA