POS Accessories

POS Accessories:

		Cable (Powered USB Connection, White) for MX Units
		Cable (5 Meters, MX8xx to DB9M Power on Pin 1)
		Stand (Adhesive) for the MX Series
		Cable (2 Meters, MX8XX Single Port, DB9F Power Pin9, ROHS)
		Thin Stylus (Requires Holster-27698-01-R) for the MX Series
		Cable (6 Feet, RJ45 to DB9 Male)
		Cable (USB 24V Powered Cable, 3-Pin Printer Connector)
		Wide Table Top Slant I/O Tray (4611-048 7282)
		Audio Pigtail (with Speaker Out and Mic In Jacks)
		Base Stand (for TP5800 and TP6000 Series)
		Touch Panel (ELO, 15 Inch with FR CPT)
		Fan (CPU with Heat Sink) for the TP5800
		PCB Main TP5800 (1G, V.G+ TP5800G)
		Touchscreen Covers (for 15 Inch Touchscreens, 10 Sheets/Package)
		T/S Plastic Cover (Pack of 10) for the Magnus
		Cable (12 Feet, RS-232, DB9 Female) for the TT8500
		Pass Thru Cable (12 Feet, RS-232, DB9 Male and Female) for the TT8810
		L Connector Cable (Power Cable) for the 88XX
		Cable (RS232) for the TT8500
		Cable (12 Feet, PC USB Cable, ROHS) for the TT8500, TT8810 and TT8870
		Base Stand (for 17 Inch Magnus)
		Bar Code Slot Reader (for 17 Inch)
		MSR (2-Track, Keyboard Wedge) for the 17 Inch Magnus
		MSR (3-Track, Keyboard Wedge) for the 17 Inch Magnus
		LCD Rear Display and Bracket (10 Inch) for the Magnus XV and XV-2
		Barcode Scanner (and Bracket) for the Magnus XV-2
		Rear Display (Serial) for the 17 Inch Magnus
		Rear Display (PD3000 Emulation) for the 17 Inch Magnus
		MSR (with Tracks 1-3, USB) for the XV-2
		Base Stand (P/4) for the 15 Inch Magnus
		Barcode Slot Reader (for the 15 Inch Magnus)
		MSR (Tracks 1-2, Prefix 0 x D8) for 15 Inch XV
		MSR (Tracks 1, 2 and 3) for 15 Inch AIO and XV
		Rear Mount Display (2 x 20, 15 Inch, Serial) for the XV
		Rear Mount 2 x 20 Display (Pole Display Modified to Fit Older AIO)
		Rear Mount Display (2 x 20, PD3000 Emulation, Serial) for the 15 Inch Magnus
		Rear Mount (2 x 20, Display, 15 Inch, XV UTC Standard and Serial)
		MSR (2-Track, Serial) for 15 Inch Magnus and AIO
		MSR (3-Track, Serial) for 15 Inch AIO and Magnus XV
		Magnetic Stripe Reader (Tracks 1-2, USB) for 15 Inch
		MSR (USB if Added Later) for the 15 Inch TOM
		Fingerprint Reader (for Stealth M5 USB and URU 4000)
		Barcode Slot Reader (Keyboard Wedge, Right Side and Integrated) for the Stealth M5 and TOM M5
		MSR (Track 2 Only - Will Not Work on TOM-M5) for the StealthTouch M5
		MSR (Keyboard Wedge, Tracks 1 and 2) for the Stealth M5 - Will Not Work on the TOM-M5
		FingerPrint Reader/MSR (Tracks 1-2) for the Stealth M5
		MSR (Tracks 1-2, Keyboard Wedge for Digital Dining) for the StealthTouch M5 - Not for the TOM M5
		Fingerprint Reader/MSR (Tracks 1-2 for Digital Dining) for the StealthTouch M5 - Not for the TOM M5
		MSR (with Tracks 1-2, Prefix 0XD8) for the StealthTouch M5
		MSR (with Tracks 1, 2 and 3) for the M5
		FingerPrint Reader/MSR (with Tracks 1, 2 and 3) for the Stealth-M5
		LCD Rear Display and Bracket (10 Inch) for the StealthTouch M5
		Base (for the Stealth M5)
		Barcode Scanner (and Bracket) for the StealthTouch M5 - Not for the TOM M5
		Rear Customer Display (2 x 20, OPOS/Aedex and Serial) for the M5
		Rear Customer Display (2 x 20, PD3000 Emulation and Serial) for all M5s
		Rear Customer Display (2 x 20, UTC Standard and Serial) for All M5s
		MSR (with Tracks 1 and 2, Serial and OPOS) for the StealthTouch-M5
		MSR (Tracks 1-2, Serial for Stealth M5 - Not for TOM-M5)
		MSR (Tracks 1-2-3, USB) for the TOM-M5
		FingerPrint/MSR (1-2-3 Combo) for the 15 Inch TOM-M5
		MSR (Tracks 1-2, USB for Stealth M5 - Not for TOM-M5)
		PCB Riser (PS2, TP056E2) for Fuj/ELO
		Power Supply (for the 12 Inch MXI and 15 Inch Touch Monitor)
		Barcode Slot Reader (Stealth and OM M5 and USB - Left Side on Bracket)
		Cash Drawer (2 Media Slots, Epson Interface, 24V and No Bell) - Color: Black
		Till Replacement (for the 49-CDR400D)
		Fingerprint Reader and Bracket (USB URU - Fits any Terminal)
		Kit (4611-846 8Q1999) Provides Two 6-Inch Post Ext IG
		Cable (RS232C6) for the LM3000
		RS485 I-O Cable
		Cable (6 Feet, RJ to RJ) for the LogicNet LS3000
		Cable (15 ft. Coiled Keyboard Wedge, Universal, for the PSC Powerscan QS6000-1000)
		Docking Station (for the NURIT 8000S)
		Cable Adapter (IEC320-C14 to C C5, 6 Inch)
		Key Injector and App Load (for the Everest+)
		Deployment Key Injection or Application Load (for the MX830)
		Short Powered USB Cable (.8 Meters, 4611-010 8314)
		Software App (for the Omni 7100)
		SC 5000 License (PP2000 Emulation)
		Vertical Stand (Dark Gray) for the IR-700
		Bump Bar (for Kitchen Video)
		Bundle (LD9900U Pole, CR1800 with Cable and LK1800M Keyboard)
		Cable (Serial) for the LM3008
		Cable (RS485) for the LM3008 and LS3000
		Cable (Connects Bump Bar to LS6000)
		Ithaca Cable (12 Inches, with Reverse Pin Out)
		Ithaca Cable (12 Feet, Regular Pin Out)
		Pole Display (2 x 20, Serial, Adjustable Height, Power Supply and Black) for any Terminal
		Pole Display (2 x 20, CD7220 EPROM, Serial, Adjustable Height and Power Supply) for any Terminal
		Pole Display (2 x 20, PD3000 Emulation, Power Supply, Any Terminal and Adjustable Height) - Color: Black
		Pole Display (2 x 20, UTC Standard, Adjustable Height and Power Supply) for any Terminal
		Pole Display (for Focus Software, 2 x 20, Adjustable Height and Power Supply) for any Terminal
		External CDROM Drive (KS and FT, USB - Will Replace CDR2220)
		External Combo CD Read-Write DVD ROM Drive (Fits All)
		Compact Flash Upgrade (4GB)
		Compact Flash Upgrade (to 8GB) for LA3800s and LC8200s
		Upgrade (8GB Upgrade) for LC8200s with Compact Flash Already - Only
		Power Adapter (120 VAC) for the 4-in-1 Cash Drawer
		Universal Power Brick (Requires Line Cord) for the Omni 3750 120V or 240V
		Power Supply (for the Omni 3200 Series Terminals)
		Power Supply (for the Omni 3730)
		Power Supply (100-240 VAC, 12VDC/1A) for the Vx 810 PIN pad
		Power Supply (DC/DC and 12VDC/2A - Car Use Only) for the Vx 670
		Cable (Serial Interface, DB9F-25F, 4-in-1 and Self-Powered)
		Paper Roll (Case of 20) for the Vx 670
		Cable (8 ft. Coiled Laser DB9-Pin Female Squeeze) forPSC
		Cable (15 ft. Wand Emulation Coil DB9-Pin) for PSC Decoded Scanners
		Cable (8 ft. Coiled DB9-Pin) for PSC-Q5538517 to IBM-7526
		Fixed Wedge Stand (for the Omni 7000, Everest and MX Series)
		Open Flip Swivel Stand (for the Omni 7000, Everest and MX Series)
		Quick REL Swivel Pivot Stand (with Mounting Plate - Sticky Pad Not Included)
		Metal Base and Pad (7 Inches, with Rubber Feet)
		Stand Low Profile (Center Hole Swivel) - Color: Black
		KP200 Pocket (with Tether) for the Mx Series
		Stand Swivel (Center-Hole, Low Profile and Security Plate VFI)
		Locking Stand (for the MX/OMNI)
		Telescoping Locking Stand (for the OMNI and MX Units)
		Compact Flash Memory (2GB) for the 15A2 and 17A2
		DVD Burner (Gray) for the 17A2
		Power Supply Brick (12V DC - Power Adapter is Part#-E042259) for the 15A1, 15A2 and 17A2
		Replacement 80GB 2.5 Inch Sata Hard Disk Drive (for the 15A2 and 17A2)
		Wireless Card MiniPCI Kit (for the 15A2 and 17A2)
		Customer Display (for 15A2 and 17A2)
		Memory (512MB DDR2 SODIMM 200 Pin PC2-3200) for the 15A1 and 17A2
		Compact Flash Memory (1GB) for the 15A2 and 17A2
		VFD Customer Display (Gray) for the 1729L, 15A2 and 17A2
		Memory (1GB DDR2 SODIMM 200 Pin PC2-3200 400MHz) for the 15A1 and 17A2
		MSR Attachment (2-Track, USB without FP)
		MSR (2-Track, U.R.U FP, USB)
		MSR Attachment (3-Track, USB without FP)
		MSR (3-Track, U.R.U FP Reader, USB)
		Printer Stand (Integrated with CDRW/DVD Drive)
		Upgrade (U.R.U Finger Print for SD400)
		Intelligent Wedge Cable
		IW3000 Intelligent Wedge Cable (Converts RS232 Data into Keyboard Data on Pin 2 Standard, with DB25 Female Connector and AT Keyboard Cable)
		IW3000 Intelligent Wedge Cable (Converts RS232 Data into Keyboard Data with PS2 Connector)
		Adapter (Converts RS232 Data Into Keyboard Data On Pin 2 - STD - DB25-Pin Male CNT)
		Intelligent Wedge Cable (Male, Data on Pin2)
		Adapter (Converts RS232 Data Into Keyboard Data On Pin 3 DB25-Pin Male CNT)
		Rear Customer Display (2 x 20) for All In One
		Wall Mounting Bracket (for the LC8200)
		Wall Mount (for LCD)
		Cable (DB9/Mini Din 8 - Pole Display)
		PS-2 Keypad-Keyboard Interface Cable to Computer
		Non-Touch Monitor (15 Inch, Grade A+ and No Pixel Loss)
		Non-Touch Monitor (17 Inch, Grade A+ and No Pixel Loss)
		Second LM Master Unit (Required for Zero Single Point of Failure)
		LCD Display (2nd, Screen Size 12.1 Inch, Res 1024 x 768)
		2nd LCD Display (12.1 Inch Screen - Comes with Bracket)
		Spare Battery Charger (for the Vx 610 Terminal)
		VX570/O5750 NA1 8MF/4MS HS SC 3 SAMS
		Base (Full, No Spare Battery and No Dongle) for the Vx 670
		Base (WWA, Full MOD/SER, LG Battery) for the Vx 670
		Substitute (Three Track Upgrade) for the LA3800
		Display Lens (for the Omni 7000 Signature Capture)
		Power Supply (for the LA3800 and LC8000 Series)
		Switching Power Supply
		Customer Display (2 x 20 LCD) for the JIVA 8000
		Customer Display (2 x 20, VFD, 11mm, Black) for JIVA
		Pole Display (9mm VFD, Serial, 12.5 Inch) for the KS Series
		Pole Display (9mm VFD, USB, 12.5 Inch) for the KS Series
		Customer Pole Display (9mm VFD, Serial, Height 14.4 Inch) for the FT Series
		Customer Pole Display (9mm VFD, USB, Height 14.4 Inch) for the FT Series
		Customer Display (No Pole, 2 X 20 LCD, Serial) for the KS6300
		Customer Pole Display (2 x 20 LCD, Serial, Height 14.4 Inch) for the FT Series
		Customer Pole Display (3 x 20 LCD, USB, Height 14.4 Inch) for the FT Series
		Cable (DB9-Din6)
		Power Supply (120V) for the TT8500, TT8810 and TT8870N
		Power Adapter (for Powering the TT1500 from the Mouse Port of a Computer)
		Battery (Rechargeable) for All POSIFLEX Terminals
		Bump Bar 20 Foot Cable
		Cable (6 Feet, RS232)
		15 Inch Unit (for the Pioneer POS Bundle Retail Edge Version 7.5)
		15 Inch Unit (for the Pioneer POS Bundle Retail Edge Version 8.0)
		KS FingerPrint Reader Attachment (No MSR)
		MSR Attachment (2-Track, USB and No Fingerprint) for the KS6115/KS6315
		MSR Attachment (2-Track, USB and U.R.U. Fingerprint) for the KS6115/KS6315
		MSR Attachment (3-Track, USB and No Fingerprint) for the KS6115/KS6315
		MSR Attachment (3-Track with Fingerprint, ES, USB) for the KS6115/KS6315
		2 Additional Serial Ports (for the LC8200)
		Upgrade (from 256MB to 1GB - Pre-Installed)
		Upgrade (from 256MB to 512MB, Pre-Installed) for LC8200
		Magnetic Stripe Reader (Keyboard Wedge, Tracks 1 and 2) for the Stealthtouch
		Mag Card Reader (Tracks 1 and 2, External Y-Cable)
		Floppy Drive Case and Cable
		Power Supply (for All Magnus, 100-200V) for Units with External Power Supply
		Power Supply (100-200V - for Units with Internal Power Supply) for the Magnus
		Power Supply (110-220V) for the StealthTouch M5 - Not for the TOM M5
		Rear Customer Display (2-Line x 20-Character Display, VFD, Serial and DB9)
		Integrated Tray (with Wing, for Use with Large Printers and 12 Inch or 15 Inch Monitors) for the SurePOS 300
		Tethered Stylus (with Set Screw) for the TT8810
		Second VGA (for LC8200 Industrial Computer Installed)
		Wall Mount Plate (Ultra Slim with Vesa Adapter) for the KS6300
		Wall Mount Plate (Ultra Slim and Integrated Vesa Adapter) for KS
		Wall Mount Kit (for the Jiva 8000)
		Wall Mount Kit (for the TP8000 with Hard Drive)
		Wall Mount Plate (Ultra Slim) for the JIVA 5000
		WEPOS Preloaded in LC8200 or LA3800 Series
		Wireless Card (Super G) for the LC8200
		WiFi Option (for the LA3800 and LA3801)
		Windows CE (for the LC8200 Industrial Computers)
		WindowsXP (Embedded) for the LC8200
		WindowsXP (Preloaded) for the LC8200
		Standard Keyboard (Full Size US English QWERTY Layout with Number Pad, PS/2 Interface Cable, Black)
		Mini Keyboard (Dual Interface - USB and PS/2, Black US English QWERTY Layout. The reduced size - 12 Inch x 6 Inch is perfect for conserving counterspace)
		Standard Optical Mouse (Dual Interface - USB and PS/2, Plug-n-Play)

< < Previous Next Page > >